Cedar Creek Motorsports

ATV Alarm Functions

Alarm Functions

Function Button

State

Function

Operation

Instruction

Normal

First Level Guard

The Alarm sounds 2 beeps, the  turn signal lights flash 2 times, the device is set in alarm condition after 3 sec.  Being touched of first time the alarm sounds 5 beeps, with flashing turn lights. Being touched off  within 5 sec. The alarm sounds for 10 sec. With turn lights flashing. The active start circuit will be cut off at same time.

 

 

Second level alarm

The alarm sounds 1 beep, turn lights flash 1 time, the deviceset to alarm condition after 3 sec. Being touched off at first time, the alarm sounds 5 beeps, turn lights flash. 2. Being touched off again within 5 sec. The alarm sounds for 5 sec., turn lights flash. The active start circuit is cut at same time.

 

Guard

Emergency Alarm

While in alarm condition the alarm will be activated with turn lights flashing uninterruptedly if someone attempts  to start the motor using the key, and the active start circuit will be cut off at same time. The alarm can be ceased by  turn key off or pressing alarm release button.

 

Running

Rob protection

The Motor will be stopped within 1 sec., the alarm sounds uninterruptedly, turn lights flash and active start circuit cut off at same time.

Guard

Release Safe-guard

The alarm sounds 2 beeps, the turn lights flash 2 times, the device will be released.

 

Alarm

Release alarm

The alarm sounds 2 beeps, the turn lights flash 2 times, the device will be released.

 

Running

Remote Stop

The active circuit will be cut off, and motor will shut off immediately

 

Normal

Adjust Sensivity

The alarm sounds 1 beep is the first level, the highest level. The alarm sounds 2 beeps is the second level. The alarm sounds 3 beeps is the third level, the lowest level.

Normal or Guard

Remote Start

Press twice in 1 second, the motor will be started automatically.

Normal or running

Locating/overtaking

To locate you ATV at night the alarm will sound 6 beeps and turn lights will flash. Press  To overtake while running and the alarm will sound for 10 sec and turn lights will flash at same time

 

Normal

Fright alarm

The alarm sounds for 10 sec. With turn lights flashing at same time.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

User Tips:

  1. The “Start” button can not be pressed when remote start was adopted, otherwise fuse will be burnt.
  2. The engine can not be remote start if break light was broken, The break light must be renewed.
  3. The device must be earthed while equipped and tested pm ATV.
  4. Don’t drop or immerge controller in water. Avoid high temp with controller.
  5. Renew batteries if the distance of remote controller becomes short or indicator light does not work.
Color of wire

RED

Black

Orange

Blue

Function

+ battery

- Battery

Elec. Lock postive

Positive start

Color of wire

Pink

Yellow

Yellow

Gray

Function

Extinction of upside

Turn signal

Turn signal

Extinction of  underside